background image

 

SL-889 HDMI 2.1 Cat-3 Cable EMI Tester 

 

User Guide 

 

Simplay-UG-SL889-1.1 

© 2019-2020 Simplay Labs, LLC., 

27 

 All rights reserved. CONFIDENTIAL 

Disclaimer of Warranty 

THIS WARRANTY IS EXPRESSED IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF 
MERCHANTABILITY, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON SIMPLAY 

LAB’S PART, AND IT NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PARTY TO ASSUME FOR SIMPLAY LABS ANY OTHER

 LIABILITIES. THE 

FOREGOING CONSTITUTES THE BUYER’S SO

LE AND EXCLUSIVE REMEDY FOR THE FURNISHING OF DEFECTIVE OR NONCONFORMING PRODUCTS AND 

SIMPLAY LABS WILL NOT IN ANY EVENT BE LIABLE FOR COST OF SUBSTITUTE OR REPLACEMENT, COST OF FACILITIES OR SERVICE, DOWNTIME COSTS, 
LOSS OF PROFITS, REVENUES OR GOODWILL, RELIANCE DAMAGES, LOSS OF DATA, LOSS OF USE IF OR DAMAGE TO ANY ASSOCIATED EQUIPMENT, OR 
ANY OTHER INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES BY REASON OF THE FACT THAT SUCH PRODUCTS WILL HAVE BEEN 
DETERMINED TO BE DEFECTIVE OR NONCONFORMING. 

THE RIGHTS AND OBLIGATIONS OF THE PARTIES UNDER THIS AGREEMENT SHALL NOT BE GOVERENED BY THE PROVISIONS OF THE 1980 U.S. 
CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALE OF GOODS OR THE UNITED NATIONS CONVENTION ON THE LIMITATION PERIOD IN 
THE INTERNATIO

NAL SALE OF GOODS, AS AMENDED (COLLECTIVELY, THE “CONVENTIONS”); RATHER, THE RIGHTS AND OBLIGATIONS OF TH 

EPARTIES HSALL BE GOVERNED BY THE LAWS OF THE SATE OF CALIFORNIA, INCLUDING ITS PROVISIONS OF THE UNIFORM COMMERCIAL CODE. FOR 
THE AVOIDANCE OF DOUBT, THE CONVENTIONS ARE HEREBY EXCLUDED. 

This Limited Warranty gives you specific legal rights. You may also have other rights that may vary from state to state or from country to country. You 
are advised to consult applicable state or country laws for full determination of your rights. 

Simplay Labs products are not designed for any “critical applications.” ”Critical applications” shall mean life support syste

ms, medical applications, 

connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure 
could lead to injury to persons or loss of life or property damage. 

Copyright Notice 

Copyright © 2016-2017 Simplay Labs, LLC., a Lattice Semiconductor company. All rights reserved. 

Trademark Acknowledgment 

Simplay

®

, Simplay HD

®

, Simplay HD logo, 

Simplay Labs™ 

and Simplay Labs logo are trademarks or registered trademarks of Silicon Image, Inc. in the 

United States and/or other countries. HDMI

®

 and the HDMI logo are trademarks or registered trademarks of, and are used under license from, HDMI 

Licensing, LLC. in the United States or other countries. MHL

®

 and the MHL logo are trademarks or registered trademarks of, and are used under 

license from, MHL, LLC. in the United States or other countries. All other trademarks and registered trademarks are the property of their respective 
owners in the United States and/or other countries. 

HDMI Licensing, LLC; MHL, LLC, and Simplay Labs, LLC are wholly owned subsidiaries of Lattice Semiconductor, Inc. 

The absence of a trademark symbol does not constitute a waiver of the trademarks owner

s rights or other intellectual property rights with regard to 

a product name, logo or slogan. 

Export Controlled Document  

This document contains materials subject to the Export Administration Regulations. Transfer of this information by any means to a foreign 
destination may require a license. These materials shall not, in the absence of authorization under U.S. and local law and regulations, as required, be 
used by or exported or re-exported to (i) any U.S. sanctioned or embargoed country, or to nationals or residents of such countries; or (ii) any person, 
entity, organization or other party identified on the U.S. Department of Commerce's Denied Persons or Entity List, the U.S. Department of Treasury's 
Specially Designated Nationals or Blocked Persons List, or the Department of State's Debarred Parties List, as published and revised from time to 
time; (iii) any party engaged in nuclear, chemical/biological weapons or missile proliferation activities; or (iv) any party for use in the design, 
development, or production of rocket systems or unmanned air vehicles. 

Limitation of Liability 

Simplay Labs reserves the rights to refuse warranty service of products under disputable conditions. Simplay Labs also holds the rights to declare final 
decision whether products are within warranty conditions. The following actions and damages will result in voiding the limited warranty: 

Damage caused by act of nature, such as fire, flood, wind, earthquake, lightning, etc. 

Damage or incompatibility caused by failure to perform a proper installation or to provide an appropriate operational environment for the product, 
including but not limited to unstable wired/ wireless network connection and phone lines, bad grounding, external electro-magnetic fields, direct 
sunlight, high humidity and vibration. 

 

Damage caused by impact with other objects, dropping, falls, spilled liquids, or submersion in liquids. 

 

Damage caused by unauthorized repair or disassembling of the product. 

 

Damage caused by any other abuse, misuse, mishandling, or misapplication. 

 

Damage caused by third party peripherals (including but not limited to visible damages on motherboard or other electronic parts of the product 
such as burn spots after electric discharge, melting, fusing, splitting, etc.). 

 

Any unauthorized software or modification of built-in software not approved by Simplay Labs. 

 

The serial number of the product (or serial number stickers of its parts) has been modified, removed, blurred or damaged. 

 

Cracks and scratches on LCD and plastic material as well as other defects caused by transportation, handling or customer abuse.

 

 

Summary of Contents for SL-889





























Reviews: