WARNING
Change in the sequence of emergency functions due to malfunctions
SimonsVoss and "Made in Germany" stand for maximum safety and reliab-
ility. In individual cases, however, malfunctions of your devices cannot be
ruled out. This may pose a risk to the safety of persons and property, which
are additionally protected by the protective functions in the RingCast.
1. You should test your devices at least once a month (see
Shorter intervals may also be required according to other
regulations concerning your overall system).
2. Test the protective functions at least once a month (see
Locking devices and identification media
1. Activate the locking device.
9
Locking device is free-running.
2. Activate an authorised identification medium.
9
The locking device indicates authorised access (or battery warning,
then replace batteries).
9
Locking device opens when the battery condition is good.
3. Wait until the locking device disengages.
9
Locking device indicates disengagement (or nothing if battery is
low).
4. Activate an unauthorised identification medium.
9
Lockdevice indicates no authorisation (or battery warning, then
change batteries).
5. Check the battery level (see
).
WaveNet devices
1. Check the signal quality (see
).
2. Check accessibility (see
and
).
3. Check the battery level (see
).
5.6.6 IO Status and LockNode responsiveness
You can check the following:
Signal at the respective input
Results of the last broadcast for each device
Status of the outputs
Analogue voltage present
WaveNet
(Manual)
5. WaveNet Manager
179 / 210