SimonsVoss WaveNet Manual Download

Page: 178 / 210

2. Select the LockNodes you want to test.

3. Click on the button Test .

The "Group order for WaveNet nodes" window closes.

LSM tests the accessibility of the LockNodes.

LSM displays test results.

If a LockNode cannot be reached, the problem may be either the LockNode
or the RouterNode.

Single LockNode of a segment not
reachable

LockNode probably has problems.

No LockNode of a segment reach-
able

RouterNode probably has problems.

5.6.5 Device function test

Check the functionality of your WaveNet devices once a month. Please
also refer to the documentation of the devices.

WaveNet

(Manual)

5. WaveNet Manager

178 / 210

Summary of Contents for WaveNet



















































































































































































































Search results

Summary of Contents for WaveNet

Reviews:

Related manuals for WaveNet

Brands by name

Popular brands

SimonsVoss WaveNet, Manual

Search results

Summary of Contents for WaveNet

Reviews:

Related manuals for WaveNet

Brands by name

Popular brands