SimonsVoss WaveNet, Manual

Page: 140 / 210

2. In the drop-down menu
▼ Select domain
select the domain (input)
whose RingCast you want to delete.
3. Click the Delete button Delete below the drop-down menus
▼ Select
domain
.
9
RingCast of the domain is flagged for deletion.
4. Click on the button Save .
5. Click on the Exit button.
9
RingCast of the domain is deleted and is no longer displayed in the
overview.
Repeat the steps until you have deleted all desired RingCasts. You can
then reconfigure the IO configuration of the RouterNodes at the
corresponding inputs (see
RouterNode: Digital input [
}
77]
).
5.4.6 Device-specific settings
5.4.6.1 RouterNodes
You can set the IO configuration for each RouterNode individually (see
I/O
configuration and protection functions [
}
68]
) and set router-specific
settings (interface password and IP change by the OAM tool) in the
browser interface (see
Browser interface [
}
140] ).
Browser interface
You can make settings for RouterNodes, GatewayNodes and SmartBridges
with Ethernet interface via the browser, among other things:

Allow changes via the OAM tool

Password for the web interface

IP address/DHCP operation
request
You receive the device with the following factory configuration:
IPaddress 192,168,100,100
Subnet mask 255.255.0.0
User name SimonsVoss
Password SimonsVoss
The procedure is described for RouterNodes. Follow the same procedure
for SmartIntego GatewayNodes and MobileKey SmartBridges.
Change the default password after the first call.
WaveNet (Manual)
5. WaveNet Manager
140 / 210