NOTE
Same event for forwarding
You cannot select LockNodes (and thus the lock in which the LockNode is
built in) and thus exclude them from event forwarding. If you use event for-
warding, the same event applies to all LockNodes selected (in Select LN ).
For example, you cannot only forward authorised accesses for one Lock-
Node and unauthorised access attempts for another.
RouterNode: Digital input
In the dropdown list
▼ Input
, you can set how the LockNodes of the
RouterNode should react to a signal applied to the respective RouterNode
input. (= applied voltage is higher than the fixed reference voltage).
Comparison voltages (RN and RN2)
<0,9 V
DC
LOW (no signal)
>2.1 V
DC
HIGH (signal)
"Input"
Standard entry. The RouterNode does not respond to an ap-
plied signal. However, you can forward the signal changes to
LSM.
WaveNet
(Manual)
5. WaveNet Manager
77 / 210