9. Pull off the thumb turn.
9
Electronic thumb-turn is disassembled.
9.2.5 Functional test
Perform a function test after each installation and each battery change.
ü
Assembly or battery change completed
ü
Digital Cylinder AX programmed
ü
At least one identification medium authorised
1. Pull hard on the electronic or mechanical thumb-turns.
2. Turn the electronic thumb-turns. The Digital Cylinder AX the AX locking
cylinder must not be tight, nor rotate the tappet.
3. Activate an authorised identification medium.
4. Check that the Digital Cylinder AX engages and pushes out the locking
bit.
9
Mounting or battery change successfully completed.
9.2.6 AP functional test
Carry out a function test:
After assembly
After realignment
After changes to the fastening screw
Digital Cylinder AX
(Z5)
(Manual)
9. Installation
47 / 158
Summary of Contents for Digital Cylinder AX
