SimonsVoss Digital Cylinder AX, Manual

Page: 35 / 158

9.1.2.2 Fitting with clip-on covers
ü Special tool available.
ü 1.5 mm hexagonal wrench available.
1. Dismantle the electronic thumb-turn (see Unmounting the thumb-turn
(electr.) [
}
43]
).
2. Also disassemble the other electronic knob.
3. Insert the AX locking cylinder (see
Insert locking cylinder [
}
49]
).
4. Secure the AX locking cylinder with the face plate screw (see
Fixing the
locking cylinder [
}
50] ).
5. If necessary, attach the covers.
6. Fit the electronic knob (see Mounting thumb-turn (electr.) [
}
40] ).
7. Also fit the other electronic knob.
8. Carry out a functional test (see Functional test [
}
47] ).
9
Digital Cylinder AX is fitted with clip-on covers.
9.1.3 Half cylinder (HZ, reader on one side)
9.1.3.1 Standard mounting
ü
Special tool available.
ü
1.5 mm hexagonal wrench available.
1. Dismantle the electronic thumb-turn (see
Unmounting the thumb-turn
(electr.) [
}
43] ).
2. Insert the AX locking cylinder (see Insert locking cylinder [
}
49] ).
3. Secure the AX locking cylinder with the face plate screw (see Fixing the
locking cylinder [
}
50] ).
4. Fit the electronic knob (see Mounting thumb-turn (electr.) [
}
40] ).
5. Carry out a functional test (see Functional test [
}
47] ).
9 Half cylinder AX is fitted.
9.1.3.2 Fitting with clip-on covers
ü Special tool available.
ü 1.5 mm hexagonal wrench available.
1. Dismantle the electronic thumb-turn (see Unmounting the thumb-turn
(electr.) [
}
43]
).
2. Insert the AX locking cylinder (see
Insert locking cylinder [
}
49]
).
3. Secure the AX locking cylinder with the face plate screw (see
Fixing the
locking cylinder [
}
50] ).
4. Fit the electronic knob (see Mounting thumb-turn (electr.) [
}
40] ).
5. Carry out a functional test (see Functional test [
}
47] ).
9
Half cylinder AX is mounted with clip-on covers.
Digital Cylinder AX (Z5) (Manual)
9. Installation
35 / 158