6.3 Versions
6.3.1 Anti-panic (AP)
Doors can be fitted with mortise locks with panic function. In some mortise
locks, the panic function can be blocked by certain positions of the tappet
(area R).
345°
O section: 15° to 345°
15°
(15)°
(15)°
150°
210°
(30)°
(30)°
R section:
15° to 150°
R section:
210° to 345°
U section: 150° to 210°
For these doors/mortise locks a Digital Cylinder AX with panic function
(AP) must be used.
Digital Cylinder AX with panic function are equipped with a spring
mechanism which always pulls the tappet into a non-critical position (area
O or area U). This means that the tappet can no longer block the panic
function of a panic lock.
Installation does not differ from installation of the normal comfort cylinder
(see
Comfort cylinder/anti-panic cylinder (CO/AP, reader on one side)
For doors built along escape routes after April 2003, the following points
must be observed:
All closures for which the approvals state that the Digital Cylinder AX
does no affect the function of the lock, all Digital Cylinder AX can be
used.
Digital Cylinder AX
(Z5)
(Manual)
6. Basic configuration, profiles and fea-
tures
20 / 158
Summary of Contents for Digital Cylinder AX
