2. Attach core protection adapter. While holding
the inside thumb-turn, rotate until the adapter
locks into the locking cylinder, so that it is flush.
9
The notches on the core protection adapter
now fit flush into those on the core tube.
3. Fasten core protection adapter using the
supplied clip, as shown in the diagram:
9
The two markings point in the direction of
the core protection adapter.
9
The clip must lock into position correctly on
the core protection adapter.
4. Check whether the clamp is fastened flush with
the core protection adapter.
5. Push locking cylinder into the door from the
inside.
6. Fasten locking cylinder with the fastening
screw.
7. Use the installation tool to fit outer knob to the
locking cylinder.
5 Help and other information
Information
material/doc-
uments
You will find detailed information on operation and
configuration and other documents under
Informative material/Documents in the Download
Z4 (.MP) .KA (.SET)
5. Help and other information
9 / 32
EN