Simons Voss Technologies WaveNet-Funktester, Quick Manual

Page: 29 / 120

4 Operation:
NOTE
Falsification due to changed base station location
A changed location of the base station falsifies all
measurement results obtained so far.

Do not change the location of the base station until
the measurements have been completed.
If one of the connections cannot be used, you have the
following options:

Repeat the measurement.

Reduce the distance between the base station and
the mobile station.
 Set up another RouterNode to improve coverage
and also measure from its position.
Preparation
ü
Base station and handset or accessories
undamaged.
ü Handset battery full (see
Battery test and battery
replacement [
}
32] ).
WaveNet-Funktester 4. Operation:
29 / 120 EN