Interference sig-
nal strength
Connection can
be used (3060)
Connection can
be used
(SmartIntego)
100%-10%
Interference sig-
nal
No
No
If an interference signal is detected during the
interference signal measurement, another device
transmits on the same or a similar frequency band. In
this case, contact SimonsVoss Technologies GmbH.
5 Battery test and battery replace-
ment
You will find the battery on the right side of the mobile
station.
ü
Battery inserted.
Switch on the mobile device with the on/off toggle
switch.
9
All LEDs light up temporarily.
9
Battery status is indicated by the Ready or Error
LED (see table).
Ready LED lights (4 seconds)
Battery full.
Error-LED lights up (4 seconds)
Battery empty. Replace the bat-
tery.
No response
Battery completely discharged.
Replace the battery.
You can obtain the required battery from SimonsVoss
Technologies GmbH.
WaveNet-Funktester
5. Battery test and battery re-
placement
32 / 120
EN
