2 Safety instructions
WARNING
Access through a door may be denied if locking devices are installed or pro-
grammed incorrectly. SimonsVoss Technologies GmbH is not liable for
consequences of incorrect installation, such as denied access to injured
persons, physical damage or any other losses.
WARNING
The batteries used in SmartRelay may pose a fire or burn hazard if handled
incorrectly. Do not recharge, open, heat or burn these batteries. Do not
short-circuit batteries.
IMPORTANT
SimonsVoss Technologies GmbH accepts no liability for damage caused to
doors or other components due to incorrect fitting or installation.
IMPORTANT
SmartRelay may only be used for its intended purpose. No other use is per-
mitted.
IMPORTANT
Specialist knowledge in door mechanics, door approvals, electronic system
installation and the use of SimonsVoss software is required when installing
a SimonsVoss SmartRelay. Only trained specialists may install the cylinder.
IMPORTANT
If SmartRelays are placed in storage for longer than a week, the backup
battery is to be removed.
IMPORTANT
SmartRelays must be installed in compliance with the ESD (electrostatic
discharge) directive. You should particularly ensure that you do not touch
the circuit boards and their integrated circuits.
SREL1+2
(Manual)
2. Safety instructions
5 / 38
