Simons Voss Technologies SmartCD.MP, Quick Manual

Page: 16 / 76

4 Connection to PC, Laptop or Touchbook
SmartCD.MP can be directly connected to a free USB port (USB 1.1, USB
2.0 or USB 3.0) on a PC or laptop, or on a netbook or Touch Book in the
case of mobile programming, using the supplied cable. If SmartCD.MP
is connected to a USB hub, the hub must have its own power supply.
SmartCD.MP can be used to programme all SC (.MP) digital
components in the SimonsVoss System 3060 directly on a PC or
laptop.
SmartCards or SmartTags can only be programmed if the SmartCD.MP
is connected directly to a PC or laptop.
In the case of mobile programming, you may also use LSM Mobile in
conjunction with a netbook or Touch Book (operating system Windows
7/8/10). In such a case, the programming device must be connected to
the netbook or Touch Book using the USB cable.
5 Initial operation
After you have connected SmartCD.MP to a PC or laptop using the USB
cable, the new USB hardware is detected by the Windows operating
system. The drivers are installed together with the LSM software
automatically.
SmartCD.MP
4. Connection to PC, Laptop or
Touchbook
16 / 76 EN