13
14
OPERATING INSTRUCTIONS
CAUTION
Failure to clean properly will cause the detergent injection system to become
clogged and inoperable.
CAUTION
Never use:
• Bleach, chlorine products and other corrosive chemicals
• Liquids containing solvents (i.e., paint thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and will damage the surface being cleaned.
CAUTION
Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.
WINTERIZING AND LONG-TERM STORAGE
Optimum Winterizing Procedure
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Antifreeze (039-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump
from freezing.
1. Connect the pump saver hose onto the adaptor and quick-connect coupling.
2. Depress button on top of pump saver container.
3. Continue until fluid exits the pressure hose.
4. Remove the hose from pump inlet.
Quick Winterizing Procedure
If you cannot do the Optimum Winterizing
procedure, you can still protect your
pressure washer from winter damage by
doing the below:
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn off immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room that does not reach freezing
temperatures. Do not store near furnace
or other sources of heat as it may dry out
the pump seals.
PUMP SAVER
Recommended: Pressure Washer
Antifreeze (039-8602-0)
