INSTALATION AND CONFIGURATION GUIDE
simon.es/simon100
43
Simon | 100
COMMAND_CLASS_MULTICHANNEL
-
MULTICHANNEL_ENDPOINT_GET
Sent when an added device has Multichannel capabilities in order to
know the device points.
-
MULTICHANNEL_ENDPOINT_GET
Sent when an added device has Multichannel capabilities in order to
know the device points.
-
MULTICHANNEL_CAPABILITIY_GET
Sent when an added device has Multichannel capabilities in order to
know each channel capabilities and manage them properly.
-
MULTICHANNEL_COMMAND_ENCAP
Used to encapsulate commands addressed to device channels.
COMMAND_CLASS_VERSION
-
VERSION_COMMAND_CLASS_GET
Sent when an added device has Multichannel capabilities in order to
ask the device points.
COMMAND_CLASS_WAKE_UP
-
WAKE_UP_INTERVAL_GET
When you add a device that supports COMMAND_CLASS_WAKE_UP, HUB iO
will send this command in order to request the supported attributes of this command class.
-
WAKE_UP_INTERVAL_SET
After receive the ZW_WAKE_UP_INTERVAL_REPORT, HUB iO will configure the
Wake Up attributes with default time and setting the HUB iO as node to be reported.
-
WAKE_UP_NO_MORE_INFORMATION
After Wake up notification Hub iO will perform pending actions
over it and send the battery device to Sleep sending WAKE_UP_NO_MORE_INFORMATION. Pending actions
can be Basic Get or Basic Set.
