Simoco SRM9020PLUS, Operating Instructions Manual, Page: 7 / 32

SRM9020 plus ~ PMR Operating Instructions
© TMC Radio 2007 Page 1 TNM-U-E-0086 Issue 1.0
1. INTRODUCTION
The SRM9000 Series Radios are advanced, versatile Digital Signal Processor
(DSP) controlled, two-way mobile radios. The SRM9000 Series is available in a
number of frequency bands and versions for specific applications. This manual
describes the operation of the SRM9020
plus PMR Alphanumeric Display
variant.
The radio consists of a SRM9000 Transceiver Unit that may be mounted in the
vehicle boot or under a seat, and a SRM9020
plus Alphanumeric Control
Microphone which is designed to mount within view and reach of the driver. A
speaker connected to the radio provides the audio interface.
The radio is software programmable and it can be customised to the operational
requirements of your particular fleet. Your Simoco representative can help in
programming your radios facilities to meet your present and future
requirements. This guide describes the facilities that are currently available and
can be programmed into the SRM9020
plus .
1.1 I
NSTALLATION
As the installation of your SRM9020 plus Radio is a technical and possibly
hazardous operation, we recommend that it is installed and set up for use by
your dealer or an authorised installer. However, if you need information
regarding the correct procedures for installation, please refer to the SRM9000
Series Installation Instructions supplied with the radio.