7
www.simmonsdrums.net
setTing the pad voice
Press the
[PAD ASSIGN]
button to change the sound of an
individual pad or trigger. When in pad assign mode, a red dot will
appear in the LED menu above
[PAD]
.
In pad assign mode, striking a pad once will identify the 3 voice
number on the LED menu. Hitting the pad again will advance that
pad to the next sound (1-215). You can also use the
[SELECT]
[+]
/
[–]
or
[DATA WHEEL]
.
Please see the Appendix for a complete list of sounds.
setTing the pad volume
Press
[VOLUME]
to enter pad assign menu. If pad assign menu is
selected,the corresponding menu indicator will be lit.
The LED menu will display the volume of the currently selected
pad or trigger. To select a different pad, strike the pad once. Use
the
[SELECT] [+]
/
[–]
or
[DATA WHEEL]
to set the volume
between 0-9.
SetTing the pad pan
Press
[PAN]
to enter pad assign menu. If pad assign menu is
selected, the corresponding menu indicator will be lit.
In this menu, the LED menu will show the pan of current pad,
which can be selected by pressing the
[PAD ASSIGN]
button on
the top panel or by hitting a pad. The
[SELECT] [+]
/
[–]
or
[DATA WHEEL]
can be used to select the pan (0-9, loop) for the
current pad.
Editing kits and pads
9605 SDD7 Multipad Manual.indd 7
3/21/12 11:20 AM
