8
SDD7
owner’s manual
Saving Kits
Press
[SAVE]
to enter the kit save menu. The
[SELECT] [+]
/
[–]
or
[DATA WHEEL]
can be used to select a user kit (21-30, loop)
current kit setting. During kit selecting the user kit number will
keep flashing.
Press
[SAVE]
again, the current kit setting will be saved to the
selected kit. The machine will return to the kit menu and select this
user kit as the current one, if all the data has been saved successfully.
If there is an error during save, “Err” will appear on the LED.
Note: The unsaved kit setting will be lost after kit changing.
reverb
Press
[REVERB]
to adjust the reverb level for all drum kits. In this
menu, the digit on far left of LED will display letter ‘r’. The two
digits on the right will display current reverb level. The
[SELECT]
[+]
/
[–]
or
[DATA WHEEL]
can be used to adjust the reverb
level (0-3, no loop). This value will auto-save after adjustment.
SetTing the pad gain
Press
[GAIN]
to enter pad assign menu. If pad assign menu is
selected, the corresponding menu indicator will be lit.
In this menu, the LED menu will show the gain of current pad,
which can be selected by pressing the
[PAD ASSIGN]
button
on the top panel or by hitting a pad. The
[SELECT] [+]
/
[–]
or
[DATA WHEEL]
can be used to select the gain (0-9, loop) for the
current pad.
9605 SDD7 Multipad Manual.indd 8
3/21/12 11:20 AM