SimLab X1, Instruction Manual

Page: 46 / 48

46
| 46 48
BOX E - Floor
HARDWARE KIT
#
Part QTY Note
E1 Floor 1
E2 Floor LEFT 1
E3 Floor RIGHT 1
E4 Floor support LEFT 1
E5 Floor support RIGHT 1
E6 Bolt M8 X 16 DIN 912 16
E7 Bolt M6 X 16 DIN 7991 21 Countersunk.
E8 Washer M8 DIN 125-A 16
E9 Slot-Nut M8 16
E10 Slot-Nut M6 21
BOX D - Pedal Tray
PROFILE KIT
#
Part QTY Note
DP1 160X40 Length=470mm 1
DP2 80X40 Length=470mm 1
HARDWARE KIT
D3 Pedal plate LEFT 1
D4 Pedal plate RIGHT 1
D5 Bolt M8 X 25 DIN 912 8
D6 Bolt M6 X 16 DIN 912 12 Extra.
D7 Bolt M5 X 16 DIN 912 12 Extra.
D8 Bolt M8 X 25 DIN 7991 8 Countersunk.
D9 Washer M8 DIN 125-A 8
D10 Slot-Nut M8 8
D11 Slot-Nut M6 12 Extra.
D12 Slot-Nut M5 12 Extra.
BOX F - DDU Mount
(optional installation, extension required)
HARDWARE KIT
#
Part QTY Note
F1 DDU mount bracket 1
F2 DDU mount bridge 1
F3 DDU mount holder LEFT 1
F4 DDU mount holder RIGHT 1
F5 Bolt M8 X 20 DIN 912 4
F6 Bolt M6 X 20 DIN 912 4
F7 Bolt M5 X 16 DIN 7991 4 Countersunk.
F8 Cap-Washer M6 4
F9 Washer M8 DIN 125-A 4
F10 Washer M6 DIN 125-A 4
F11 Washer M5 DIN 125-A 4
F12 Lock-Nut M6 4
F13 Lock-Nut M5 4
Disclaimer: for some entries on this page, we supply more than required as spare
materials. Don’t worry if you have some leftovers, this is intentional.
BOX C - Sim Feet
HARDWARE KIT
#
Part QTY Note
C1 Foot support plate 4
C2 Foot 4 Threaded ball-joint rod fitted.
C3 Bolt M8 X 25 DIN 912 8
C4 Washer M16 DIN 125-A 8
C5 Nut M16 8 4 pre-fitted.
C6 Slot-Nut M8 8