SimLab X1, Instruction Manual

Page: 45 / 48

45
| 45 48
BOX A - X1-Pro Base
PROFILE KIT
#
Part QTY Note
AP1 120X40 Length=1350mm 2
AP2 120X40 Length=500mm 2
AP3 40X40 Length=500mm 2
HARDWARE KIT
A4 Corner bracket 40x40 12
A5 Corner bracket 40x40 cap 12
A6 Profile 120x40 end-cap 4
A7 Profile 40x40 end-cap 4
A8 Bolt M8 X 16 DIN 912 24
A9 Washer M8 DIN 125-A 24
A10 Slot-Nut M8 24
BOX B - X1-Pro Add-On
PROFILE KIT
#
Part QTY Note
BP1 120X80 Length=848mm 1
BP2 120X40 Length=260mm 2 To attach front mount.
BP3 120X40 3N Length=950mm 1 Left upright, engraved.
BP4 120X40 3N Length=950mm 1 Right upright, engraved.
BP5 80X40 Length=1000mm 2
BP6 80X40 Length=834mm 1 Monitor cross-beam.
HARDWARE KIT
B7 Upright LF 1
B8 Upright LR 1
B9 Upright RF 1
B10 Upright RR 1
B11 Sandwich plate 120X80 2
B12 Sandwich plate 120X40 2
# Part QTY Note
B13 Monitor side plate 2
B14 Front mount 1
B15 Front mount side plate 2
B16 Monitor mount bracket 1
B17 Monitor mount pivot 1
B18 VESA plate 1
B19 Profile 120x40 end-cap 6
B20 Profile 80x40 end-cap 4
B21 Bolt M8 X 30 DIN 912 16
B22 Bolt M8 X 20 DIN 912 14
B23 Bolt M8 X 16 DIN 912 24
B24 Bolt M6 X 20 DIN 912 4
B25 Bolt M6 X 16 DIN 912 4
B26 Bolt M8 X 20 DIN 7991 12 Countersunk.
B27 Bolt M6 X 20 DIN 7991 4 Countersunk.
B28 Cap-Washer M8 16
B29 Cap-Washer M6 4
B30 Washer M8 DIN 125-A 38
B31 Washer M6 DIN 125-A 12
B32 Washer M8 DIN 988 16 Used with M8 cap-washers.
B33 Lock-Nut M6 8
B34 Slot-Nut M8 46
B35 Slot-Nut M6 4
Disclaimer: for some entries on this page, we supply more than required as spare
materials. Don’t worry if you have some leftovers, this is intentional.