Simex SRT-94-XA, User Manual

Page: 34 / 44

User manual - METER SRT-94-XA
Register Write Range Register description
3Ch Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit” parameter -
register no. 3Dh)
3Dh Yes 0 ÷ 1
“unit” parameter in “rEL2” menu:
0 - seconds; 1 - minutes
3Eh Yes 0 ÷ 2
“AL”
parameter in
“rEL2”
menu:
0
- no changes;
1
- on;
2
-
off
3Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included
40h Yes -999 ÷ 9999
“ SEtP ” parameter in “ rEL3 ” menu, no decimal point included
41h Yes -999 ÷ 999 “ HySt ” parameter in “ rEL3 ” menu, no decimal point included
42h Yes 0 ÷ 5
“ modE ” parameter in “ rEL3 ” menu:
0
- “
noAC
” mode;
1
- “
on
” mode;
2
- “
oFF
” mode;
3 - “ in ” mode; 4 - “ out ” mode; 5 - “ modb ” mode
43h Yes 0 ÷ 999
“t on” parameter in “rEL3” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit” parameter -
register no. 45h)
44h Yes 0 ÷ 999
“toFF” parameter in “rEL3” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit” parameter -
register no. 45h)
45h Yes 0 ÷ 1
“unit”
parameter in
“rEL3”
menu:
0 - seconds; 1 - minutes
46h Yes 0 ÷ 2
“AL” parameter in “rEL3” menu: 0 - no changes; 1 - on; 2 -
off
47h Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL3 ” menu, no decimal point included
48h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL4 ” menu, no decimal point included
49h Yes -999 ÷ 999
“
HySt
” parameter in “
rEL4
” menu, no decimal point included
4Ah Yes 0 ÷ 5
“ modE ” parameter in “ rEL4 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode;
3 - “ in ” mode; 4 - “ out ” mode; 5 - “ modb ” mode
4Bh Yes 0 ÷ 999
“t on” parameter in “rEL4” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit” parameter -
register no. 4Dh)
4Ch Yes 0 ÷ 999
“toFF” parameter in “rEL4” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit” parameter -
register no. 4Dh)
4Dh Yes 0 ÷ 1
“unit” parameter in “rEL4” menu:
0 - seconds; 1 - minutes
4Eh Yes 0 ÷ 2
“AL” parameter in “rEL4” menu: 0 - no changes; 1 - on; 2 -
off
4Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL4 ” menu, no decimal point included
34