Simex PUR-94D, User Manual

Page: 77 / 80

User manual - CONTROLLER PUR-94D
Parameter Description Default value User's value
Desc.
page
StAr Start state of the regulators 0.0 46
dSrC Feedback of the regulators LooP 46
InEr Inertial block OFF 46
PID regulators configuration (“FuZL” menu) 47
SLOP Incline of the characteristics of the fuzzy logic
block. FuZL menu parameter
0.0
47
unit Time unit of incline of the characteristics of the
fuzzy logic block. FuZL menu parameter
SEC
47
HySt Hysteresis of incline of the characteristics of the
fuzzy logic block. FuZL menu parameter
0.0
47
Display parameters
bri Display brightness bri6 48
Settings of SV display value (menu “diSP”)
diSP SV display value selection no 49
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 48
PEA Minimum detected change 0.0 48
timE Maximum time of peak displaying 0.0 48
HdiS The type of displayed value HOLd 48
H r1 Source of relay R1, and LED R1 control rEAL 49
H r2 Source of relay R2, and LED R2 control rEAL 49
H r3 Source of relay R3, and LED R3 control rEAL 49
H r4 Source of relay R4, and LED R4 control rEAL 49
HOUt Source of current output control rEAL 49
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
49
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
49
A r3
Permission to changes of relay R3 threshold
without of the user password knowledge
on
49
A r4
Permission to changes of relay R4 threshold
without of the user password knowledge
on
49
APid
Permission to changes of regulator's setpoint
without of the user password knowledge
on
50
RS-485 interface configuration (menu “rS”)
Addr Device address 0 50
77