71
ES
PT
ENG
WARNING:
- Installations with roof exit terminal (4a) and coa-
xial exhaust (13) require the use of a condensation
recovery (12) that has to be connected to the water
drain siphon (waste water).
- The installation of the roof exit terminal (4a) requi-
res the removal of the two ø 60 and ø 100 reducers.
- Before installing accessories, lubricate the internal
part of gaskets with silicon-based products. Avoid
using oils and greases.
Fig..7
KEY
. 1.. 90°.MF.polypropylene.curve.(6.pcs.).code.8077450
. 2.a. Polypropylene.extension.L..1000.(6.pcs.).code.8077351
. 2.b. Polypropylene.extension.L..500.(6.pcs.).code..8077350
. 3.. Hinged.tile.code.8091300
. 4.. Roof.terminal.kit.L..1381.code.8091204
. 4.a. Coaxial.roof.exit.terminal.code.8091205
. 5.. Polypropylene.extension.L..250.with.socket.code.6296513
. 6... 45°.MF.polypropylene.curve.(6.pcs.).code.8077451
. 7.. Exhaust.terminal.code.8089501
. 8.. Internal-external.ring.nut.kit.code.8091500
. 9.. Air.inlet.terminal.(supplied.with.unit)
.10.. Inlet/exhaust.fitting.code.8091401
.11.. Rubber.gasket.ø.80.(supplied.as.standard)
.12.. Condensation.recovery.L..135.code.8092800
.13.. Coaxial.exhaust.ø.80/125..L..885.code.8091210.
Type C (separate ø 80 flues and
coaxial exhaust terminal)
Type C (separate ø 80 flues)
TABLE OF LOAD LOSSES OF ACCESSORIES
.
Load.loss
(mm.H
2
O)
.
Inlet
.
Exhaust
90°.MF.polypropylene.curve.
0,80.
0,80
45°.MF.polypropylene.curve.
0,45.
0,45
Polypropylene.extension.L..1000.
0,35.
0,45
Polypropylene.extension.L..500.
0,15.
0,20
Coaxial.roof.exit.te.Fitting.(pos..10)
.
-.
4,00
Roof.exit.terminal..L..1381.
-.
1,30
Exhaust.terminal
.
-.
1,50
Air.inlet.terminal.
.
0,20.
-
Polypropylene.extension.L..250.with.socket.
-.
0,10
Coaxial.exhaust.L..885.+.Fitting.(pos..10)
.
-.
5,00
Condensation.recovery.L..135
.
1,80.
-
STAFFA TELAIO
CALDAIA
G
M
R
Pmin
Pmax
