Fonderie Sime SpA reserves the right to amend all of the product and relative accessories specifications without prior warning.
34
35
ENG
FR
Basic support system in galvanised
steel for installation on flat or inclined
surfaces.
TECHNICAL FEATURES
OF THE SOLAR COLLECTOR
SIME PLANO
1. Frame of aluminium profile collector (Al Mg Si 05).
2. Rear covering in 0.5 mm galvanised steel with flexible EPDM
gasket.
3. Tubular coil in copper tubes: perfect intersection and thick-
ness. The heads are drilled with upward discharge for the per-
fect adaptation of the collectors and to avoid pressure drops.
Distance between pipes = 107 mm (EN 1652).
4. Absorber with single surface made of 0.3 mm thick selective
aluminium that covers the entire surface of the window and the
supply and return pipes, increasing the collector's captivating
power, Laser welded to the coil.
5. High density thermal insulation, obtained with a 50 mm (rear)
and 20 mm (sides) thickness layer in glass wool for maximum
reduction of heat losses.
Insulation thermal conductivity in glass wool:
λ
= 0,035 W/m grd
(DIN 56612, measurement at 0 °C).
6. Tempered Mistlite solar glass, with a constant expansion coef-
ficient and a high luminous transmittance, can support adverse
atmospheric conditions (e.g. hail, extreme change of tempera-
tures, etc.). ANSI Z 97-1 (U.S.A.) BS 6206 (GREAT BRITAIN) DIN
52337 (GERMANY).
FLAT SURFACE
INCLINED SURFACE
