15
EN
2 INSTALLATION
2.1
Safety
Before burner installation, clean carefully all around the area where the burner will be installed and arrange the correct lighting
of the room.
a
WARNING
The installation, adjustment and maintenance of the appliance must be carried out by professionaly qualified person in
compliance with the standards and regulations of the laws in force as a wrong installation may cause damages to people,
animals and things for which the Manufacturer will not be responsable.
a
WARNING
Before starting installation, maintenance and disassembly turn off the electrical supply and check that it is not possible
to turn accidentally the main switch on, close fuel inlet valves and make sure they could not accidentally be opened.
2.2
Preliminary checks
2.2.1 Check supply, transport, packaging, storage
a
WARNING
CHECK SUPPLY
Check that the supply is complete and without transport damages. After removing all the packaging, check the integrity
of the contents. If in dubt do not use the burner and contact the supplier.
TRANSPORT
The transport weights of the burner and the gas train are indicated in the technical data.
STORAGE
Observe the environment temperatures which are allowed for storage and indicated in the technical data.
a
WARNING
The packaging materials must not be abandoned as they may cause danger and pollution, but they should be collected
and left in a appropriate place.
a
WARNING
Check that the capacity of the boiler is within the operating range of the burner.
2.3
Boiler plate
* Suggested dimension of connection between burner and generator.
Fig. 4 Boiler plate
MODEL
L min
L *
L max
M
N min
N *
N max
SIME FUEL 25 LN (vers.HE)
mm
130
150
170
M8
90
110
130
SIME FUEL 35 LN (vers.HE)
SIME FUEL 25 LN (vers.std)
SIME FUEL 35 LN (vers.std)
