Simco CM5, Manual

Page: 63 / 67

CM5_UM_ 9752090319_GB_V0_9 63 / 67
Example 4: Changing the control mode from VC to CC.
In the following example the control mode of the generator will be changed from Voltage
Controlled (VC, Constant Voltage) to constant Current Control (CC).
Step 1: Depress [

]
. The following text appears:
“ [Main] ”
“ Operating mode: ”
“ Local ” (this text may be different, depending on the chosen configuration)
Step 2: Depress the [ ] and/or [ ] key until the following text appears on the screen:
“ [Main] ”
“ Control mode: ”
“ VC ”
Step 3: Depress [
 ]
. The text “ VC ” now starts to flash.
Step 4: Depress the [ ] and/or [ ] key until the flashing text “ VC ” changes to “ CC ”.
Step 5: Depress [
 ]
. The text “ CC ” now no longer flashes (the setting has been changed). The
following text appears:
“ [Main] ”
“ Control mode: ”
“ CC ”
Step 6: Depress the [ ESC ] key to exit the menu. The generator will now show the main screen
again.