7. Commissioning
Plug
Figure 1
Warning:
-
Never insert any object into the air inlet grid. This causes damage to the fans.
-
Do not touch the high-voltage points. These are sharp and, during operation, they
will cause an unpleasant electrical shock (max. 0.7 mA).
-
If you have a pacemaker, you must not touch the high-voltage components of the
BlowION.
7.1. Switching on
- Ensure that the blower is connected to mains voltage.
7.2. Setting the air flow (optional)
The quantity of air blown out can be set using a potentiometer situated behind the front plate of
the blower.
1. Remove the plug at the front panel of the blower.
2. Use a small flat screwdriver to set the required air quantity by turning the potentiometer
behind the front panel either clockwise or anti-clockwise.
3. Press the plug back into the hole to protect the potentiometer.
97.52.06.0910 Blow
ION
06/06
20
