Simaudio MOON Evolution LP3 Owner'S Manual Download Page 3

MOON W-8 Dual-Mono Power Amplifier 

 

Important Safety Instructions    (cont’d) 

 

The lightning flash with the arrowhead symbol, within an equilateral triangle, is 

intended to alert the user to the presence of uninsulated “dangerous voltage” within 

the product’s enclosure that may be of sufficient magnitude to constitute a risk of 

electric shock to persons.  

 

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the 

literature accompanying the appliance. 

 

Marking by the “CE” symbol (shown left) indicates compliance of this device with the 

EMC (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the 
European Community 

 

Please read all instructions and precautions carefully and completely before 

operating your Simaudio MOON W-8 Dual-Mono Power Amplifier. 

 

1.  ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables, 

or when cleaning any component. 

2.  The MOON W-8 must be terminated with a three-conductor AC mains power cord which includes a 

protective earthing connection. To prevent shock hazard, all three connections must ALWAYS be used. 
Connect the MOON W-8 only to an AC source of the proper voltage; Both the shipping box and rear panel 
serial number label will indicate the correct voltage. Use of any other voltage will likely damage the unit and 

void the warranty 

3.  AC extension cords are NOT recommended for use with this product. 
4.  NEVER use flammable or combustible chemicals for cleaning audio components. 
5.  NEVER operate the MOON W-8 with any covers removed. There are no user-serviceable parts inside. An 

open unit, especially if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer 

all questions to authorized service personnel only. 

6.  NEVER wet the inside of the MOON W-8 with any liquid. If a liquid substance does enter your MOON W-8, 

immediately disconnect it from the AC mains and take it to your MOON dealer for a complete check-up. 

7.  NEVER expose the MOON W-8 to dripping or splashing of liquids and no objects filled with liquids, such as 

vases, shall be placed on top. 

8.  NEVER block air flow through ventilation slots or heatsinks. 
9.  NEVER bypass any fuse. 
10.  NEVER replace any fuse with a value or type other than those specified 
11.  NEVER attempt to repair the MOON W-8. If a problem occurs contact your MOON dealer. 
12.  NEVER expose the MOON W-8 to extremely high or low temperatures. 
13.  NEVER operate the MOON W-8 in an explosive atmosphere. 
14.  ALWAYS keep electrical equipment out of reach of children. 
15.  ALWAYS unplug sensitive electronic equipment during lightning storms. 

 

____________________________________________________________________________________ 

Summary of Contents for MOON Evolution LP3












Reviews: