E
N
SD
I0
1
In
cl
in
o
m
e
te
r
7
7.
Calibration of the module
Before calibrating the module, you must make sure that the module is mounted in
its final position and the vehicle is parked on a level surface.
The calibration procedure can be executed in two ways. Either through the
monitor or by using a CAL button on the inclinometer module itself.
The result of the calibration is 0° angles for both PITCH and ROLL inclinometers
at the current position of the module.
7.1 Calibration using the CAL button on the SDI01
module
To calibrate the module using the CAL button, please press and hold the CAL
button which is located on the top right corner of the module. Hold the button
until the LED light on the module starts flashing red.