E
N
SD
I0
1
In
cl
in
o
m
e
te
r
3
1.
Introduction
SDI01 is a high-resolution digital inclinometer for pitch and roll with manual
calibration. It is fully compatible with existing SIMARINE monitoring systems. The
module was designed so that configuration and calibration of the inclinometer is
quick and user friendly.
The SDI01 digital inclinometer has the following connections:
·
1 CURRENT INPUT UP TO 300A
·
2 VOLTAGE INPUTS
·
1 TEMPERATURE INPUT
NOTE: Please make sure you are running a firmware version higher than version
3.000.
2.
Safety
Only qualified electricians with proper safety equipment should make installation
of Simarine electronics. When working with batteries, you should wear protective
clothing and eye protection.
CAUTION: Batteries contain acid, a corrosive, colorless liquid that can burn your
eyes, skin, and clothing. If the acid comes into contact with eyes or skin, wash out
with lukewarm water and immediately seek medical support.
CAUTION: Do NOT connect anything to a damaged battery. It could heat up,
catch fire, or explode.
CAUTION: Lead-acid batteries can generate explosive gases during operation.
Never smoke, allow flames, or sparks near the battery. Make sure to keep
sufficient ventilation around the battery.