221-Answer Signal-#*
Where,
Answer Signal
Meaning
0
None
1
Polarity Reversal
By default, Polarity Reversal is selected.
Disconnect Signaling on FXS port
Use following command to program the disconnect signal on the FXS Port:
248-Disconnect Signal-#*
Where,
Disconnect Signal
Meaning
0
None
1
Polarity Reversal
2
Open Loop Disconnect (Battery Removal or
Current Removal)
By default, Polarity Reversal is selected.
Use following command to program Open Loop Disconnect Timer on FXS
Port:
249-Open Loop Disconnect Timer-#*
Where,
Open Loop Disconnect timer is from 001 to 999 ms.
By default, it is 500 ms.
(Refer 'Port Parameters-FXS' in System Manual for more details)
Step 8:
Call Progress Tones and Ring Type
SIMADO GFXD1111S gives flexibility to the SE to match the frequency and
cadences of the rings and call progress tones supported by the gateway to that
of the country standard in which it is installed.
Use following command to program CPT for a specific country:
104-Code-#*
Where,
Summary of Contents for GFXD1111S
Page 1: ...SIMADO GFXD1111S Quick Start...
Page 2: ......
