Step 7:
Port Parameters-FXS
CLI Type
Use following command to program the CLI type for the FXS port:
222-CLI Type-#*
Where,
CLI Type
Meaning
1
None
2
DTMF (Number, Ring)
3
ITU-T V.23 FSK
4
Bellcore FSK
5
DTMF ('D', Number, 'C', Ring)
By default, CLI type is 3.
CLI type 'None' is selected when the telephone instrument connected to the
FXS port does not have the LCD to display the number or user does not
want to detect the CLI. Detecting CLI takes time and thus the routing of call
gets delayed by 2-3 seconds, this delay can be avoided by using CLI type =
'None'.
Rep by DTMF digits in CLI
Use following command to program the digits which will replace '+' in the
CLI:
301-Number String-#*
Where,
Number string can be of maximum four digits.
By default, Number String programmed is 00.
Use following command to clear the digits programmed:
301-#*
End of Dialing
Use following command to use # as end of dialing digit:
110-Code-#*
Where,
Code
Meaning
1
Use # as end of dialing digit
0
Do not use # as end of dialing digit
By default, # is used as end of dialing digit.
Answer Signaling on FXS Port
Use following command to program the answer signal to be generated on
FXS Port:
Summary of Contents for GFXD1111S
Page 1: ...SIMADO GFXD1111S Quick Start...
Page 2: ......
