background image

Page 23 

Consumer Warranty and Defective Return Policy: 

Sima’s Outdoor Inflatable Home Theater Kits 

XL Theater Inflatable Screen - 6 month (180 day) Limited Warranty Sima Products Corporation

Limited Warranty 

Sima Products Corp. (“Sima”) warrants that if the accompanying product proves to be defective to the original purchaser in material

or workmanship within 180 days from the original retail purchase, Sima will, at Sima’s option, either repair or replace same without 

charge (but no cash refund will be made). 

IMPORTANT: TO QUALIFY FOR WARRANTY COVERAGE YOU MUST REGISTER YOUR XL 

THEATER WITH SIMA PRODUCTS WITHIN 10 DAYS OF PURCHASE.  ALL WARRANTY 

CLAIMS WILL REQUIRE WRITTEN PROOF OF TIMELY WARRANTY REGISTRATION. YOU 

CAN REGISTER FOR WARRANTY COVERAGE IN THE FOLLOWING WAYS: 

1.  Mail the warranty card from the product, post marked within 10 days of purchase to:  Sima Products, 140 

Pennsylvania Ave., Building #5, Oakmont, PA 15139 

2.  Register your warranty on line at 

www.simaproducts.com

3.  Register your warranty by telephone with Sima Customer service by calling 800-345-7462 x1270 

What you must do to enforce Warranty: 

You must deliver, mail or ship the product, together with both the original bill of sale and this limited Warranty statement as proof of 

warranty coverage to: 

Sima Products Corp. 

Attn: Customer Service 

140 Pennsylvania Ave. 

Bld. #5 

Oakmont, PA 15139 

Phone # 412-828-3700   

Fax     # 412-828-3775 

It is recommended that you call Sima at the number listed above to obtain a return authorization number. 

Limitation of Liability and Remedies 

This warranty does not cover damage resulting from accident, misuse or abuse, neglect, improper service and/or 

maintenance or if the screen has been inflated with a pump other than the original one supplied by manufacturer.

Use of unauthorized service, replacement parts or attachments will void this warranty. Misuse includes any use 

of this product for other than its intended uses as described in the product manual.  

Sima shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, 

special or punitive damages arising from the use of, or the inability to use, this product, whether arising out of contract, negligence, 

tort or under any warranty, even if Sima has been advised of the possibility of such damages. Sima’s liability for damages in no event 

shall exceed the amount paid for this product. Sima neither assumes nor authorizes anyone to assume for it any other liabilities. Some 

states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not 

apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Summary of Contents for XL-12

























Reviews: