Page 8
Troubleshooting
Problem
Unit does not operate
Possible Cause
Input voltage is below 10 volts
Problem
Fuse blown
Possible Cause
Problem
Unit operates for a short period and then turns off.
Possible Cause
Load is trying to draw too
much current
Solution:
Attach to proper supply
Solution:
Determine cause for fuse blowing and then replace fuse.
Problem
Unit operates for a while and gets warm
Possible Cause
Inverter is in thermal shut
down mode
Solution:
Allow inverter to cool down. Turn inverter off and back on to reset.
Solution:
Attach to proper supply
Problem
Unit operates for a short period and then turns off.
Possible Cause
Input voltage is below 10 volts
Solution:
Be sure load is less than rated watts of inverter. Remove
excessive load. Turn inverter off and back on to reset.
