Sima SFX-9 User Manual Download Page 24

SFX-9 Video Mixer 

 

 

 

  

 

     Basic Operations 

24 

 

 

T

ROUBLESHOOTING

 

Remember: before assuming there is technical problem, check all connections to be sure inputs and 
outputs are correctly hooked up. 
 

Problem Possible 

Cause 

Remedy 

LED’s do not light up when the 
power is turned on. 

AC adapter is not connected to the 
Mixer or is not plugged into a 
working outlet. 

Attach adapter cable to the 
mixer. Try a different AC outlet 

No picture or audio on output 
TV monitor. 

• 

AC adapter is not connected to 
the Mixer or is not plugged into 
a working outlet. 

• 

Recording VCR is not switched 
to LINE or AUX 

• 

VCR output not switched to 
VCR 

or

 TV not switched to 

channel 3 or 4. 

• 

Input Source A not in PLAY 
mode 

Attach adapter cable to the 
mixer. Try a different AC outlet. 
 
Switch recording VCR to LINE or 
AUX input to accept signals 
through the A/V inputs. Refer to 
your VCR. 

No audio on the output 

Audio mixer slide(s) are set at 
minimum levels. 

Move slide to appropriate setting 

DIGITAL EFFECTS do not work 
– have no effect on the output. 

Effects are selected but not turned 
on. 

Press EFFECTS On button to 
apply effects. 

Video output is rolling 

Unit set to wrong video standard 

Set to NTSC (USA) as described 
on page 23. 

90 D

AY 

L

IMITED 

W

ARRANTY

 

 
Sima Products Corporation warrants that if the accompanying product proves to be defective to the original 
purchaser in material or workmanship within 90 days from the original retail purchase, Sima Products 
Corporation will, at the its option, either repair or replace same without charge (but no cash refund will be 
made). To enforce this warranty, you must deliver, mail or ship the product, together with the original bill of 
sale, this limited Warranty statement as proof of warranty coverage to: 
 

Sima Products Corporation 

Attn: Customer Service 

140 Pennsylvania Ave., Bldg. #5, 

Oakmont, PA  15139

 

 

Before sending the unit in for service, it is recommended that you call  
Sima Products Corporation at 800-345-7462.

 

 

Limitation of Liability and Remedies 

Sima Products Corporation shall have no liability for any damages due to lost profits, loss of use or 
anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or 
the inability to use, this product, whether arising out of contract, negligence, tort or under any warranty, even if 
Sima Products Corporation has been advised of the possibility of such damages. Sima Products 
Corporation's liability for damages in no event shall exceed the amount paid for this product.  Sima Products 
Corporation neither assumes nor authorizes anyone to assume for it any other liabilities.\ 

Summary of Contents for SFX-9

























Reviews: