Sima SFX-9 User Manual Download Page 19

SFX-9 Video Mixer 

 

 

 

 

 

     

    Basic Operations 

19

 

 

Typical Auto FADE/WIPE 

Step 1    Push slide on Video Source Select to the top “A” position.  
Step 2    Select video inputs for Source A and Source B by pushing 

the appropriate button(s).  

 
 

Source Selection 

 

Step 3

   

Select WIPE from the MODE CONTROL panel.

      

              
 

TIP:     

We will use WIPE for purposes of this example. However, the 

AUTO mode will work in combination with whichever button 
(WIPE, KEY, MIX, or PIP) is selected in the MODE 
CONTROL panel.  

Mode Selection 

 

Step 4

  

 

 

Select one of the wipe patterns by pressing the appropriate 

button in the FUNCTIONS control panel. (Wipe patterns 
are indicated by the icons in the purple color-coded area.)

 

  
TIP:

     After selecting the desired wipe pattern, perform the wipe 

manually by moving the slide control in the Video Source 
Select control panel. If the wipe pattern is the one desired, reset 
the slide to the top “A” position before proceeding. 

Wipe Selection 

 

Step 5

  

 

 

Press the ON button (blue) in the AUTO FADE/WIPE 

section of the MODE CONTROL panel. 

        

  
TIP:

     Once pressed, the ON button changes the function of the Video 

Source Select slide control. The slide now controls the speed of 
the auto wipe. (This is indicated in the blue color-coded type 
above it.) 

Auto Wipe/Fade Selection 

 

Step 6

   

Position the slide control where desired to set the speed of 

the auto wipe.

  

 
TIP:

      The speed of the auto wipe is determined by the setting of the 

control slide. The top “A” position is fastest. The bottom “B” 
position is slowest.

 

Set Speed 

 

Step 7

   

Press the START button to execute the automatic wipe. 

 The 

wipe is illustrated below the Step 7 diagram at right 

 
TIP:

     You can change the speed of the transition while the auto wipe is 

in progress by moving the slide control. The red LED light on 
the START button will stay lit for the duration of the auto wipe. 
Pressing the START button a second time during the auto wipe 
will pause the transition. Press a third time to resume progress.

 

Auto Wipe/Fade 

     

 

 

 

 
 

B

A

 

 

 

Summary of Contents for SFX-9

























Reviews: