No picture
Device does
Not operate
•
Are Video Input lights on? If not, there is no video
input signal.
•
Has correct mode (AV, Line, Tuner, etc.) been set
on the VCR or DVD
•
Correct connecting cable?
•
Have the RCA cables been mixed up at the input
and output of the VCR/DVD?
•
Be sure inputs and outputs are of the same type –
composite to composite or s-video to s-video
•
Is the Power light on? If not, there is no power.
•
Is the connecting cable of the plug-in adapter
damaged?
Sima’s CopyThis! (Model CT-1)
will automatically enhance the
quality of the home video you are
duplicating.*
This package includes:
1 CopyThis! Unit (Model CT-1)
1 7.5V, 300 mA adapter
1 RCA style Video Cable
This Instruction Manual
Connection:
CopyThis! should be connected between your playback camcorder,
VCR or DVD and the recording VCR or DVD as shown in Fig. 1. Only the video
cables are to be connected to CopyThis!. Audio cables should be connected directly
between the playback and recording units. With Hi-8 or S-VHS capability, connect
your S-video cables to CopyThis!.
Operation:
Select A/V input on your recording VCR and press
RECORD. Then press
PLAY on your playback device.
Note on AV Input Modes:
All
VCR’s have at least one AV input mode; many have
more than one. There will be a switch or button on
the VCR that will toggle between the Tuner Mode
and AV Modes. Manufacturers use different names
to identify the AV Mode: External Mode (EXT),
Auxiliary Mode (AUX) or Line Input. (L1, L2 etc.) Consult the VCR’s user manual to
identify the AV Mode for your unit.
B & W -
CopyThis! can also give your home videos an old-time look by eliminating
color and creating black and white video. Slide the switch located on the rear panel,
from color to black and white to achieve this effect.
Note:
Some color flashing may
occur with some video sources.
Video Output Level –
You can manually adjust the video output level by turning the
Video Output Level Adjust knob on the front panel. Increase the brightness of the
video output level by turning the knob as needed. Leave in center position for
normal video
Video Input Level Lights –
These lights indicate the video level of the input signal.
It is normal for the lights to fluctuate on different scenes or tapes.
FCC Information
This equipment generates and uses radio frequency energy and if not installed and used
properly, that is, in strict acceptance with the manufacturer’s instructions, may cause
interference to radio and television reception. It has been type tested and found to comply
with the limits for a Class B computing device in accordance with the specifications in
Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
* Re-orient the receiving antenna
* Relocate this equipment with respect to the receiver
* Move this equipment away from the receiver.
* Plug this equipment into a different outlet so that this equipment and receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions. The user may find “How to Identify and resolve
Radio/Television Interference Problems” prepared by the FCC helpful. The booklet is
available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-
000-00345-4
* Notice: Use of this product for unauthorized duplication of copyrighted
material from DIVX, DVD, VHS or other media is prohibited under the federal
copyright laws unless the copy qualifies as a fair use under Copyright Laws.
CT-1
Fig.1
Fig. 2
