900-Lumen LED Projector Manual
Page 9 of 14
Signal source choosing
If your projector does not automatically detect the video input source, press the Input
Mode button on the remote control (it may be labeled 'I-mode' or 'Source'), and the
menu will appear in the top, left-hand portion of your screen.
Press the “Up” or “Down” button to choose the signal source, and press the “Right”
button to confirm the signal source.
Picture Menu
When you press the “LCD Menu” button on the remote, the Main Menu for picture
adjustment appears.
At picture menu, you can adjust: contrast, brightness, hue, saturation, sharpness,
picture mode, scaling.
Press the “Up” or “Down” button to choose the item you need to change, and use the
"Right" or "Left" button to adjust.
MENU OPERATION:
Volume menu
After you press the “LCD Menu” button, the Main Menu for picture appears.
Then press “Right” once to display the "AUDIO" sub-menu.
Although you can adjust the volume here, you can also adjust volume directly by
pressing “VOL+” and “VOL-” on the remote.