900-Lumen LED Projector Manual
Page 12 of 14
Please refer to the table below for solutions to the most common problems:
Imaging Unit:
LCD
Resolution Ratio:
640X480
Contrast:
600:1
Resolution supported:
800X600 1024X768
Lamp:
LED
Nominal brightness:
900 Lumens
Projection distance:
1 - 3 meters
Projection picture size:
30 - 100 inches
Power Consumption:
60W
Projecting Lens:
F=125
Input Voltage:
12V
Output terminal:
12V Power Out (for external speakers, etc.)
Color:
16770K
Installation model:
Desk or Ceiling
Keystone correction:
±15
0
Menu Language:
Chinese, English
Internal Speaker:
1.0w x 1
Operation Mode:
Manual and remote control
Weight (kg):
1Kg
Specification
200 mm x150mm x65mm
Working temperature
-10° +40°
Input terminal:
AV (Composite), YUV (Component), HDMI, VGA
SPECIFICATIONS:
TROUBLESHOOTING:
Trouble
Please Check
Fails to power on
Ensure the projector's power cable is inserted properly both at the projector and the wall.
Ensure the remote control battery is inserted properly.
No images/sound
Ensure the input terminals are inserted properly.
Check whether the signal source works well.
Sound available but no image
Ensure the input terminals are inserted properly.
Check whether the brightness and contrast have been adjusted to the minimum value.
Image available but no sound
Ensure the input terminals are inserted properly.
Check whether the sound volume has been adjusted to an acceptable value.
Ambiguous image
Check the adjustment of the focus.
Check whether the projection distance has exceeded the allowed focus range.
Check whether the signal source works well.
Weak color
Check whether the adjustment of hue and color temperature is abnormal.
Frozen system
Remove the power cable from the projector, then power the projector again after one minute.