SVD800HD
SERVICE GUIDE
page - 13 -
PC097 MICRO BOARD
1.
When replace the micro board pay attention to use the EEPROM C.I.20 of the old board into the new one,
otherwise it's necessary to do again all type of adjustments, such as white & black, convergence and so on.
2.
Positions of the DIP switch SW02:
Original setting
With Eprom (C.I.29) version <1.31
1-OFF = user mode.
1-ON = factory service mode
2-OFF = fan protection enabled
2-ON = fan protection disabled
3-not used in service (it must be set in OFF position)
4-not used in service (it must be set in OFF position)
3.
Adjust the potentiometer placed on R126 position to centre the OSD: use MEMORY MANAGER the largest
menu and horizontal frequency towards the maximum of range.
Note
. Usually in service no adjustments are requested. If introducing a new microprocessor board the OSD will appear
not correctly centred carry out the adjustment as at the step 3.
Summary of Contents for SVD800 HD Millennium
Page 2: ...SVD800HD SERVICE GUIDE page 2 WHITE PAGE...
Page 34: ...1 2 3 5 6 9 8 7 4...
Page 35: ...1 2 3 4 5...
