Mounting
The projector can be Floor mounted (upright) or Ceiling mounted (inverted). Choose
the method that best suits your installation.
The NERO4 projector has been design to be submit the EN60950/UL950 Safety Norms
with it's glass cabinet.
Nevertheless, even if the best materials and adhesives available in the market, in or-
der to guarantee a safe application on the long long run, exclusively for the ceiling
mounting applications, SIM2 has equipped the projector with glass safety screw that
are aesthetic part of its cabinet (see K
at page 12).
To determine where to position the projector, consider the size and shape of your
screen, the location of your power outlets, and the distance between the projector
and the rest of your equipment.
Important:
The projection lens is centered to the chassis . Make sure the centerline of
the lens is centered horizontally to the center of the screen.
Floor Mounting
Place the projector on a secure and flat surface (such as a table or a shelf). Adjust the
two elevator feet at the bottom of the projector until the projector is level on all sides.
Rotate the adjustable feet counter clockwise to raise the projector or clockwise to
lower it. Repeat with the remaining feet as needed.
NERO4
User Guide
17