Sim2 NERO 4S UHD, User Manual

Page: 46 / 64

Select the DHCP in “On” if the IP Address assignment of the projector has to be done
from an external DHCP server automatically. In DHCP mode IP Address, Subnet Mask,
Default Gateway are not selectable because the server automatically assign a
reference number. With DHCP in “Off” status, enter the IP Address, Subnet Mask,
Default Gateway if user need to insert the address manually.

DHCP: choose “On” for an automatic IP assignment from an external DHCP server.

IP Address: select an IP address

Subnet Mask: select subnet mask number

Gateway: select the default gateway of the network connected to the projector.

DNS: select the Domain Name System (DNS), a hierarchical decentralized naming
system.

Reset: choose “Ok” to reset to their default values the items in this sub-menu.
Control
Enable specific communication protocol.

Crestron: choose “On” to enable it.

Extron: choose “On” to enable it.

PJLink: choose “On” to enable it.

AMX Device Discovery: choose “On” to enable it.

HTTP: choose “On” to enable it.
Extron
Is a registered trademark of Extron Electronics, Inc. of the United States.
NERO 4 S is compliant to support Extron device(s) for reference. For more info see the
web site http://www.extron.com/ .
Ethernet communication port number is 2023.
Crestron
Is a registered trademark of Crestron Electronics, Inc. of the United States.
The NERO 4 S projector is supported by the specified commands of the Crestron
Electronics controller and related software, for example RoomView®
( www.crestron.com/getroomview ). For more info see the web site
http://www.crestron.com/ .
Ethernet communication port number is 41794.
AMX
Is a registered trademark of AMX LLC of the United States.
This projector is supported by AMX ( Device Discovery ), see http://www.amx.com/ .
Ethernet communication port number is 9131.
PJLink
Applied for trademark and logo registration in Japan, the United States of America,
NERO 4 S
User Guide
46