Sim2 NERO 4S UHD, User Manual

Page: 13 / 64

Custom Remotes
You can use your own IR remote control to control your NERO 4 S projector.

If you are using a remote control with learning capabilities, use the projector re-
mote control to teach the commands to your remote.

If you are using a programmable remote control, the setup software probably al-
lows importing Hex codes. See “ SIM2 NERO 4 S IR Control” document, for a list of
all the projector codes.
Operation
The NERO 4 S projector has two IR receivers (A , B) one on the front of the unit and
one on the top. The operative range of the remote control is approximately 10 m (33
ft.) and ±15°. Make sure that there is nothing obstructing the infrared beam between
the remote control and the IR receiver you are pointing to. You can point the remote
control towards the screen, as the IR beam is reflected by the screen towards front IR
receiver of the projector. In this case the effective range of the remote control may be
smaller than declared.
Item Description
A Front IR receiver
B
Top IR receiver
Batteries
To install batteries in the remote control:

Open the battery cover.

Insert two AAA (LR03) batteries making sure the polarities match the + marks in-
side the battery compartment.

Reinsert the cover.
NERO 4 S
User Guide
13
B
A