5
ht5000
iNfO
Displays the current status of the projector and information
concerning the projected video/graphic signal.
This function is displayed on pressing the
key on the remote
control (or, in the absence of the On Screen Display, the
▶
key
on the keypad).
QUiCK MENUS
The quick menus provide access to the main adjustments that
affect image quality without calling the main menu. BRIGHTNESS,
CONTRAST, COLOUR, TINT, SHARPNESS and FILTER adjustments appear at
the bottom of the screen one after the other when the
▼
and
▲
keys are pressed.
MESSAgES
The following messages could appear on your screen:
No Signal
The system does not recognise any signal applied to the se-
lected input. In this case:
•
Make sure the selected input is connected to a video
or graphic signal and that that source is functioning cor-
rectly.
•
Check the condition of the cables used to connect the
system to the various sources.
•
Make sure the video or graphic signals supplied by the
source are compatible with the system’s technical spe-
cifications and, in particular, with those of the selected
input.
Out of range
This message appears when either the resolution or the ver-
tical/horizontal frequency of the input signal exceeds system
specifications (when an input is supplied with an incompatible
signal (e.g. after setting the components input to YPrPb 15kHz
a progressive signal is connected).
