23
��
Image
Adjustments
menu.
Image too dark, too pale or unnaturally coloured
- Verify compatibility of video/graphic signals with technical
specifications of your projector.
- Go to
Picture
menu, select and regulate any of the following,
accordingly:
Contrast
,
Brightness
,
Color
, and
Tint
.
- If necessary, reset the
Color Temperature
and
Gamma
Correction
(found on the
Image Adjustments
/
Advanced
Settings
menu).
Graphic image with poor quality vertical detail
- Verify compatibility of video/graphic signals with technical
specifications of your projector.
- Press
Auto
(on your remote or keypad) to execute automa-
tic adjustments.
- Adjust
Frequency
and
Phase
parameters, found in the
Image Adjustments
menu, to optimise vertical detail of the
projected image.
Video Image showing colour misalignment on vertical
details
- Verify compatibility of video/graphic signals with technical
specifications of your projector.
- Adjust
Y/C Delay
settings in the
Image Adjustments
/
Advan-
ced Settings
to reduce colour misalignment. For best results
use an external colour bar test pattern source.
Remote control does not work
- Check the batteries and for correct polarity.
- Ensure that the area between the infrared sensor (front of
projector) and the remote control is free of obstruction.
- Ensure that infrared sensors (front and rear of projector) are
not exposed to intense light levels.
You can purchase the following optional accessories at your
Dealer:
- Wall/Ceiling Bracket Kit.
12 OPTIONAL ACCESSORIES
Use only original, or
SIM2 Multimedia
approved, accessories.
CAUTION: for ceiling/wall installation, by means of suspension
bracket, carefully follow the instructions and safety instruc-
tions recommended by the Manufacturer in the bracket’s
literature.
