SIM2 XTV 4K INV
SIM2 XTV 4K QEC
User Guide
22
Network
This menu section provides access to network settings.
Wi-Fi:
turn on the Wi-Fi option to connect the SIM2 XTV 4K to Internet via wireless
network. Set Wi-Fi switch in ON and appears the available network; select one of these,
press OK to confirm and enter, if necessary, the Wi-Fi network password (recall the
virtual keyboard pressing OK button).
Ethernet:
it permits, when a LAN is used, the manually inserting of ethernet access
data (IP address, Subnet mask, Gateway and DNS) or chose the auto IP acquisition
mode (it depends of how the network is configured).
Test Internet Conn.:
it automatically checks the state of connection to internet.
Messages about the state and the result of checking will appear on screen.
Network Info:
it shows the parameters, as type of connection, (IP address, Subnet
mask, Gateway and DNS) of network connection.
BT
This menu section provides access to Bluetooth settings.
Bluetooth switch:
enable the Bluetooth feature.
Setup:
it permits to pair the Bluetooth devices with SIM2 XTV 4K and manage them.
General
This menu section provides access to general settings and information.
Language:
it permits to set the OSD Language.
Time Zone:
it permits to set the time zone
Input Android keyboard:
it permits to select the type of Android keyboard.
Menu time:
it sets the duration where the OSD menu stay visible on the screen. Select
OFF to keep the OSD menu until you change the OSD status.
Range [OFF
–
5S
–
15S
–
30S]
Sleep Timer:
it sets the countdown timer interval. The countdown timer will start when
there is no signal being sent to the projector. The projector will automatically power
off when the countdown has finished.
Range [OFF
–
10min
–
20min
–
30min
–
60min
–
90min
–
120min]
Version Info:
it shows the various FW versions of the unit.
Update:
it permits updating the unit through the network.
Reset:
it allows you to reset the display parameters on all menus to the factory default
settings.
