3D HOME
10
11
5. Connect the possible keyboard and mouse (2);
6. Lastly connect the outside power pack by means of the proper connector (1).
After all this procedure, put the power pack socket in and switch-on the device,
pushing the switch-on button. Wait for the start-up performance execution.
Warning
In order to connect the TV and the decoder, use a HDMI cable.
3.5 First switch-on and channel scan
For the first switch-on, follow the instructions below:
1. Read the instructions on the remote control use (p. 11) and on the user interface
(p. XX);
2. Highlight the Setup entry in the main menu (5.5 paragraph, p. 25);
3. Highlight the TV Settings entry (5.5.5 paragraph, p. 26);
4. Highlight the Channel Scan entry (5.5.5.1 and 5.5.5.2 paragraphs, pp. 27, 28);
5. Highlight the Automatic Scan and then push the button Start Scan;
6. When the scanning is accomplished, the channel list is displayed;
7. If necessary, highlight the different channels in order to delete them or to change
their position.