SIM DATAVIEW, User Manual, Page: 8 / 30

7
MEM
By pressing MEM/SETUP , you can store the displayed data. There are
9999 memory spots.
The display will show a data saving screen.
By using the LEFT and RIGHT arrows, you can choose which memory
spot you want to save the displayed data. The spot will move one unit at
a time.
By pressing
SHIFT first and then using LEFT and RIGHT arrows, the spot
will move ten by ten.
Then press
ENTER to confirm the memory spot and save the data.
By using the UP and DOWN arrows, it is possible to view the other
informations relating to the memory spot (channel, reading, min, max).
Once you have chosen the desired memory spot, you can enter a
4-character code (at bottom left of the display) to remember more easily
the association of the instrument with the stored data.
With the
LEFT and RIGHT arrows, you can move between the 4 spots,
while with the UP and DOWN arrows you choose the character on each
spot.
To confirm, press
ENTER .
To go back in the menu press ESC .
To review the stored data, just turn on the DATAVIEW and press
MEM/SETUP .
SCALE
By pressing SHIFT and then GAIN/SCALE , you can choose the
measurement scale you want to use.
There are up to 6 scales available*, which allow you to connect every SIM
instruments.
*In the DW-BSE model, there is only 1 scale available and it must be
specified when ordering