Silverwing AEROPRAKT A22 FOXBAT, Manual

Page: 84 / 185

Page 85 - © SilverWing Aviation, 2005
PAGE THIRTY-THREE
DRAWING NUMBER 11.030
Installing the Forward Rudder-Cable Pulleys
SEE DRAWING FOR PARTS REQUIRED
Recommended job for one person with the fuselage monocoque supported
as required
1. Locate and inspect the rudder-cable, the outer and inner brackets, the
pulley and the guard as illustrated on the drawing. Select the correct
size bolts, stiff-nuts, castle nut, washers and cotter pin.
2. Offer up and loosely assemble exactly as in the drawing.
3. Re-check 1 and 2.
4. Tighten the nuts until the assembly is snug and firm (don’t over-
tighten). Ensure that the pulley can rotate freely.
5. Repeat on the right-hand side.
6. Thoroughly examine the finished work.
Notes: