manualshive.com logo in svg

Silverton 38SB, Owner'S Manual

Share
Download
Silverton 38SB Owner'S Manual Download Page 84

SYSTEM OPERATIONS-24

•  Disconnect the shore power cord from 
the dockside outlet.

•  Disconnect the shore power cord from 
the yacht’s inlet receptacle.

•  Store your shore power cable in a safe, 
dry location.

You should periodically check the shore 
power cord for the following:

•  Cuts, cracks or severe abrasions on 
the yellow cord covering.

•  Bent broken or loose plug blades.

•  Plug blades or connector slots that 
show signs of overheating or arcing, such 
as,
  Brown or black discoloration on insula-
tion around blades or slots.
  Discoloration and/or erosion of blade 
material.

•  Do not allow cords to be pinched by a 
closed door or hatch. Pinch points cre-
ate resistance and generate heat that can 
cause a 

fi

 re.

•  Spray all contacts monthly with an 
electrical contact cleaner, corrosion inhibi-
tor and lubricant, such as LPS-1 made by 
Holt Lloyd Corp...Please not that “WD-40” 
or silicone spays are not appropriate be-
cause the 

fi

 lm they leave increases con-

tact resistance. The proper spray types 
can be found at electrical supply houses 
or stores such as Radio Shack.

•  If a shore power cord should become 
immersed with water, it should be imme-
diately sprayed with fresh water, THOR-

OUGHLY dried, and blades and contact 
slots sprayed with a moisture displace-
ment before re-using.

REFER TO THE INDIVIDUAL ELECTRONIC  
EQUIPMENT MANUALS INCLUDED WITH YOUR 
OWNER’S PACKET FOR SPECIFIC INFORMA-
TION ON THE OPERATION OF YOUR ELEC-
TRONIC ACCESSORIES.

Summary of Contents for 38SB

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands